PERBANDINGAN PERENCANAAN PORTAL BAJA DENGAN SAP2000 DAN ETABS

Amir Mukhlis

Abstract


This investigation was aim to find the illustration of structural steel design, using SAP2000 software, and to find how far the result different of structural steel by using ETABS. This investigation is background by the difference of design result by using both of the software. Is conducted by making simulation at two application software which used in structural steel design, those are SAP2000 and ETABS. The object were used is plane frame at 7 story steel structure building. The restrain at the structural steel frame is fixed. Both of software is determined by AISC LRFD 93 code. Structure is loaded by distributed load and point load, vertically and horizontally.
Shear modulus on both application is cannot determined by the user. The structual design result shows there is no difference significanly for normal force diagram, shear force diagram and moment diagram. The design result shows the difference of structural check. The higher structural check value is 0.972 for SAP2000 and 0.920 for ETABS. Although both of structural check result of the design is different, the structure is still safe or it is not more than 1.00 value.


Full Text:

PDF

References


Dewobroto, W., 2007, Aplikasi Rekayasa Konstruksi dengan SAP2000 Edisi Baru, PT Elex Media Komputindo, Jakarta.

Setiawan, A., 2008, Perencanaan Struktur Baja dengan Metode LRFD (Sesuai SNI 03-17292002), Penerbit Erlangga,

Jakarta.

Badan Standarisasi Nasional, 2005, Perencanaan Struktur Baja untuk Jembatan (RSNI T-032005), BSN.

Badan Standarisasi Nasional, 2002, Tata Cara Perencanaan Struktur Baja untuk Bangunan

Gedung (SNI 03-1729-2002), BSN, Bandung.

Mukhlis, A, 2010, Simulasi Analitis Pengaruh Beban Ledakan Terhadap Struktur Gedung, Proceeding Konferensi Nasional Teknik Sipil (KoNTekS) 4, Bali, 2-3 Juni 2010.

Indarwanto, M., 2006, Modul 2, Teknologi Bangunan 5, Pusat Pengembangan Bahan Aja UMB, Jakarta.

Computer & Structures, Inc., 2008, Steel Frame Manual for SAP2000®, and ETABS®, CSi, California.

Suyono Nt, 2007, Rangkuman PPIUG 1983.

Computer & Structures, Inc., 2009, ETABS® Features, CSi, California, http://www.csiberkeley.com/products_ETABS.html, diakses tgl 26 Oktober 2009.

Mukhlis, A., 2006, Perhitungan Konstruksi Baja Baja Gedung TK-SD Rehoboth, Tugas Akhir, Program Studi S-1 Pendidikan Teknik Sipil, FPTK, Universitas Pendidikan Indonesia, Bandung.

Mukhlis, A., 2007, Analisis Penggunaan Software SAP dan ETABS dalam Perencanaan Struktur Baja, Skripsi, Program Studi S-1 Pendidikan Teknik Sipil, FPTK, Universitas

Pendidikan Indonesia, Bandung.




DOI: https://doi.org/10.35308/jts-utu.v2i2.346

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Teknik Sipil