Pengendalian Produksi Pascapanen pada IKM Nozy Juice dengan Metode Six Sigma

Didi Asmadi, Ilyas Ilyas, Elda Nadhilah

Abstract


This study aimed to carry out the process of controlling postharvest products, namely the fruits processed into juice produced by the Small and Medium Enterprises (SMEs) Nozy Juice in Banda Aceh. The problem faced is that an uncontrolled production process can cause product damage, which can cause losses. The research methodology used is the six sigma method, and the type of data used is secondary data, namely production process data, production quantities, and damage data. The results showed a sigma level of 3.38, which means there is still a need for improvement or control of the product because there are still product defects. There are three types of defects in the production process, namely 61% damaged stickers, 31% damaged seals, and 8% dirty. Sticker damage is the most dominant defect caused by human factors, work methods, and the environment. The corrective action suggestions are designing and establishing SOP, recording the entire production process, increasing supervision, establishing a reward/punishment system, training employees, and conducting evaluations. The results of this study are expected to provide technical and practical contributions for business actors to improve and maintain product quality, satisfaction, productivity, and profit.


Keywords


Production Control; Postharvest Product; Juice; Six Sigma

Full Text:

PDF

References


Siswadi, “Penanganan Pasca Panen Buah-Buahan dan Sayuran,” INNOFARM J. Inov. Pertan., vol. 6, no. 1, pp. 68–71, 2007, doi: 10.1128/AAC.03728-14.

R. Rukmana and Y. Yuniarsih, Kedelai Budidaya dan pasca panen, 13th ed., no. December. Yogyakarta: Kanisius, 1996.

E. Widowati, R. Utami, E. Nurhartadi, M. A. . Andriani, and A. W. Wigati, “Produksi Dan Karakterisasi Enzim Pektinase Oleh Bakteri Pektinolitik Dalam Klarifikasi Jus Jeruk Manis (Citrus Cinensis,” J. Apl. Teknol. Pangan, vol. 3, no. 1, pp. 16–20, 2014, doi: 10.17728/jatp.38.

D. Presiana, “Standardisasi Produk Pangan,” 2017, Accessed: Feb. 11, 2021. [Online]. Available: https://docplayer.info/56129160-Direktorat-standardisasi-produk-pangan.html.

I. Idris, R. A. Sari, W. Wulandari, and U. Uthumporn, “Pengendalian Kualitas Tempe Dengan Metode Seven Tools,” Teknovasi, vol. 3, no. 1, pp. 66–80, 2016.

L. Webber and M. Wallace, Quality Control For Dummies, vol. 53, no. 9. 2019.

H. Hermanto and E. Wiratmani, “Analisis Reject Gagal Curing Valve Terjepit Pada Produk Ban Luar PT Suryaraya Rubberindo Industries Dengan Metode Six Sigma Dan FMEA,” J. IKRA-ITH, vol. 3, no. 1, pp. 15–25, 2019.

K. Siregar, K. Syahputri, R. M. Sari, and F. Putri, “Pengendalian Kualitas Dengan Menggunakan Pendekatan Lean Six Sigma di PT. XYZ,” Talent. Conf. Ser. Energy Eng., vol. 2, no. 2, pp. 35–46, Jan. 2019, doi: 10.32734/ee.v2i2.436.

A. A. Saripudin and M. Satar, “Analisa Pengendalian Kualitas Produk Bracket Electric Air Bus 380 Dengan Metode Six Sigma Pada Area Profile Press Forming di PT X,” Indept, vol. 4, no. 3. pp. 25–37, 2014.

A. Fauziah, A. Harsono, and gita permata Liansari, “Usulan Perbaikan Kualitas Menggunakan Metode Six Sigma untuk Mengurangi Jumlah Cacat Produk Tahu Pada Perusahaan Pengrajin Tahu Boga Rasa,” Reka Integr., vol. 02, no. 04, pp. 166–176, 2014.

I. Gunawan, H. Taroepratjeka, and G. P. Liansari, “Usulan Perbaikan Kualitas Produk Milk Cup Untuk Mengurangi Jumlah Cacat Menggunakan Metode Six Sigma,” Reka Integr., vol. 02, no. 03, pp. 222–233, 2014.

F. A. Ekoanindiyo, “Pengendalian Cacat Produk Dengan Pendekatan Six Sigma,” J. Din. Tek., vol. 8, no. 1, pp. 35–43, 2014.

D. S. Herdiana, “Sardines product quality control in terms of HACCP to improve food security in Blambangan Foodpacker Indonesia company limited, Banyuwangi,” Int. Food Res. J., vol. 22, no. 4, pp. 1507–1512, 2015, Accessed: Feb. 11, 2021. [Online]. Available: https://www.researchgate.net/publication/282988220_Sardines_product_quality_control_in_terms_of_HACCP_to_improve_food_security_in_Blambangan_Foodpacker_Indonesia_company_limited_Banyuwangi.

D. Didiharyono, M. Marsal, and B. Bakhtiar, “Analisis Pengendalian Kualitas Produksi Dengan Metode Six- Sigma Pada Industri Air Minum PT Asera Tirta Posidonia , Kota Palopo,” J. Sainsmat, vol. VII, no. 2, pp. 163–176, 2018, [Online]. Available: https://ojs.unm.ac.id/sainsmat/article/download/7370/4275.

D. Asmadi, I. Ilyas, and E. Nadhilah, “Perancangan Penjaminan Mutu dan Pengendalian Produk Dengan Metode HACCP (Studi Kasus),” Teksagro, vol. 1, no. 2, pp. 1–13, 2020, [Online]. Available: https://journal.lp2stm.or.id/index.php/TEKSAGRO/article/view/9/10.

Pamungkas, I., Irawan, H. T., & Arkanullah, L. (2020). IMPLEMENTASI STATISTICAL PROCESS CONTROL UNTUK PENGENDALIAN KUALITAS GARAM TRADISIONAL DI KABUPATEN PIDIE. Jurnal Optimalisasi, 4(2), 108-118.

Ratnadi and E. Suprianto, “Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk,” Indept, vol. 6, no. 2, p. 11, 2016, Accessed: Feb. 12, 2021. [Online]. Available: http://jurnal.unnur.ac.id/index.php/indept/article/view/178.




DOI: https://doi.org/10.35308/jopt.v7i2.3486

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: