Analisis Six Big Loss Pada Mesin Pengolahan Minyak CPO dengan Metode OEE (Studi Kasus: di PT. Fajar Baizury and Brother)
Abstract
Keywords
Full Text:
PDFReferences
Ansori, N. M., 2013, Sistem perawatan Terpadu, Graha Ilmu, Yogyakarta.
Assauri, S., 2008, Tujuan Maintenance Blancard Logisticts engineering And management pemeliharaan, Erlangga, Surabaya.
Dhillon, B. S., 2006, Maintainability, Maintenance, and Reliability for Engineers, Taylor & Francis Group, New York.
Gaspersz, V., 2004, Production Planning and Inventory Control Edisi Ketiga, PT Gramedia Pustaka Utama, Jakarta.
Hasriyono, M., 2009, Evaluasi Efektivitas Mesin dengan Penerapan Total Productive Mainenance (TPM) di PT. Hadi Baru, Universitas Sumatera Utara, Jurusan Teknik Industri.
Kartika, E., 2010, Analisis Faktor-Faktor Penyebab Six Big Losses Pada Mesin yang Mempengaruhi Efisiensi Produksi di PT. Kimia Farma (Persero) Tbk, Universitas Sumatera Utara, Jurusan Teknik Industri.
Kurniawan, F., 2013, Manajemen Perawatan Industri: Teknik dan Aplikasi, Graha Ilmu, Yogyakarta.
Kigsirisina, S. P., 2016, Approach for Total Productive Maintenance Evaluation in Water Productivity: A Case Study at Mahasawat Water Treatment Plant, Procedia Engineering, vol 154, hal 260-267.
Nayak, E.A., 2013, Evaluation of OEE In A Continuous Process Industry On An Insulation Line In A Cable Manufacturing Unit, International Journal of Innovative Research in Science, Engineering and Technology, vol 2, no 5.
Muchiri, P. L., 2006, Performance Measurement Using Overall Equipment effectiveness (OEE): Literature Review & Practical Application Discussion, International Journal of Production Research.
Murnawan, H. M., 2008, Perencanaan Produktivitas Kerja Dari Hasil Evaluasi Produktivitas Dengan Metode Fishbone Di Perusahaan Percetakan Surabaya, Jurnal Teknik Industri.
Nachnul, A., 2013, Sistem Perawatan Terpadu, Buku Teknik Edisi Pertama, Yogyakarta.
Nakajima, S., 1988, Introduction to Total Productive Maintenance, Producticity Press Inc, Cambridge, MA.
Osama, T. R., 2010, Total Productive Maintenance Review and Overall Equipment Effectiveness Measurement, Jordan Journal of Mechanical and Industrial Engineering.
Viroolin, C. S., 2017, Analisis Efektivitas Mesin Hopper Dengan Metode Overall Equipment Effectiveness dan FMEA, Universitas Sumatera Utara, Jurusan Teknik Industri.
Yoshikazu, T., Takashi Osada., 2000, Total Productive Maintenance-TPM, Technical Report, Lulea Tekniska Universite.
DOI: https://doi.org/10.35308/jopt.v6i1.1882
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Jurnal Optimalisasi
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
JOPT: Jurnal Optimalisasi Indexing and Abstracting by: