Penggunaan metode Min-Max dalam pengendalian component material biodiesel pada PT.X
Abstract
Rapid growth in the economy increases industry competition; if planning is done correctly, one of which is stock planning using the min-max stock method, the company's strategy to lower production costs, called efficiency, will occur. The goal of this study is to ascertain whether the min-max stock method is more effective for the examination of biodiesel auxiliary components. The findings showed that there was an excess of inventory for Methanol Auxiliary Materials (CH3OH) of 80.37 percent when only 19.63% was required using the Min-Max method. Specifically, PT. X's initial stock for 2019 was 416,185 kg, while safety stock calculated using the Min-Max method was 317,127.58 kg. In those two years, it was demonstrated that the amount of final inventory of HCl raw materials at PT. X is very large in comparison to inventory calculated using the min-max stock method and that the amount of final inventory of Catalist raw materials (CH3ONa) at PT. X is also very large.
Full Text:
PDFReferences
KPAII, “Rencana Kinerja Ditjen KPAII 2023,” DITJEN KPAII, Jakarta, 2022. [Online]. Available: https://kpaii.kemenperin.go.id/documents/renkin-ditjen-kpaii-2023-Teq.pdf
S. Andono Mulyo, “Kebijakan Pembangunan Nasional Tahun 2023 Pra Rapat Koordinasi Teknis Perencanaan Pembangunan (Rakortekrenbang) Tahun 2022,” Jakarta, 2022. [Online]. Available: https://bappeda.kaltimprov.go.id/storage/data-paparans/February2022/7nxQGNJizLbnw6yRSbyy.pdf
N. Rahmah, H. Kaskoyo, S. G. Saputro, and W. Hidayat, “Analisis biaya produksi furnitur: Studi kasus di Mebel Barokah 3, Desa Marga Agung, Lampung Selatan,” J. Sylva Lestari, vol. 8, no. 2, p. 207, 2020, doi: 10.23960/jsl28207-217.
A. A. Syam, Z. H. Siregar, and U. N. Harahap, “Perencanaan kapasitas dan waktu produksi menggunakan metode Capacity Requirement Planning (CRP) pada industri tahu tempe,” J. Vor., vol. 3, no. 1, pp. 174–181, 2022, doi: 10.54123/vorteks.v3i1.152.
Z. H. Siregar, U. N. Harahap, and M. Zurairah, “Perencanan bahan baku menggunakan metode Min-Max pada PT Pacific Palmindo Industri,” Talent. Conf. Ser. Energy Eng., vol. 3, no. 2, pp. 756–764, 2020, doi: 10.32734/ee.v3i2.1073.
Z. Goldiantero, M. I. Rif’ah, and I. Sodikin, “Pengelompokan bahan baku menggunakan klasifikasi ABC dan Optimalisasi pengendalian persediaan bahan baku menggunakan metode Min-Max Stock,” J. Rekayasan dan Inov. Tek. Ind., vol. 8, no. 2, pp. 23–28, 2020, [Online]. Available: https://journal.akprind.ac.id/index.php/rekavasi/article/view/3205/2811
M. J. Siregar, “Pengendalian stok spareparts mobil dengan metode EOQ dan Min-Max Inventory,” J. Serambi Eng., vol. 6, no. 3, pp. 2096–2101, 2021, doi: 10.32672/jse.v6i3.3121.
Humas EBTKE, “Direktorat Jenderal EBTKE - Kementerian ESDM,” Siaran Pers, 2020. https://ebtke.esdm.go.id/post/2019/12/19/2434/faq.program.mandatori.biodiesel.30.b30 (accessed Apr. 18, 2023).
A. Ben Bacha, M. Alonazi, M. G. Alharbi, H. Horchani, and I. Ben Abdelmalek, “Biodiesel Production by Single and Mixed Immobilized Lipases Using Waste Cooking Oil,” Molecules, vol. 27, no. 24, pp. 1–14, 2022, doi: 10.3390/molecules27248736.
W. N. A. Wan Osman, N. A. I. Badrol, and S. Samsuri, “Biodiesel Purification by Solvent-Aided Crystallization Using 2-Methyltetrahydrofuran,” Molecules, vol. 28, no. 3, pp. 1–14, 2023, doi: 10.3390/molecules28031512.
O. Arifudin, A. Mayasari, and Ulfah, “Implementasi Balanced Scorecard dalam mewujudkan Pendidikan Tinggi World Class,” Edumaspul J. Pendidik., vol. 5, no. 2, pp. 767–775, 2021, doi: 10.33487/edumaspul.v5i2.2333.
T. Pricillia and Zulfachmi, “Perbandingan metode pengembangan perangkat lunak (Waterfall, Prototype, RAD),” J. Bangkit Indones., vol. 10, no. 1, pp. 6–12, 2021, doi: 10.52771/bangkitindonesia.v10i1.153.
M. Ridwan, S. AM, B. Ulum, and F. Muhammad, “Pentingnya penerapan literature review pada penelitian ilmiah,” J. Masohi, vol. 2, no. 1, pp. 42–51, 2021, doi: 10.36339/jmas.v2i1.427.
P. Moengin and N. Ayunda, “Lean Manufacturing untuk meminimasi Lead Time dan Waste agar tercapainya target produksi ( Studi kasus : PT . Rollflex Manufacturing Indonesia ),” J. Tek. Ind., vol. 11, no. 1, pp. 77–88, 2020, doi: 10.25105/jti.v11i1.9699.
O. R. Purba and S. Pandu, “Pengaruh quality control dan lead time terhadap aktivitas inbound logistik pada PT, Syngenta Indonesia GP Site,” J. Syntax Transform., vol. 3, no. 4, pp. 1–23, 2022, doi: 10.46799/jst.v3i4.548.
DOI: https://doi.org/10.35308/jmkn.v9i1.7513
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.