PERENCANAAN PEMBANGKIT LISTRIK HYBRID VAWT DAN SOLAR CELL SECARA OTOMATIS UNTUK PENERANGAN LAMPU JALAN

Herri Darsan, Dwi Prabowo, Maidi Saputra, Murhaban Murhaban

Abstract


Road lighting is important for transportation activities, especially at night. The design of this Hybrid plant has a working principle that is utilizing wind gusts from a passing vehicle to turn the turbine blade and the heat of solar radiation that is absorbed through the solar panel with the sun tracking system. Parameter data that influence in the design of Hybrid Generations are variations in the number of turbine blades, turbine angle, wind speed, turbine drive rotor height, density of air and heat of solar radiation. The purpose of the problem in Designing Hybrid VAWT generating systems with the optimal angle of the turbine and Solar Cell automatically to be able to meet the electrical energy requirements for street lighting. The research method used in design through three stages, namely literature review, Technical Design and preparation of work tools and materials. The design results show that the optimal type u vertical wind turbine for toll road lighting with 3 blades and an optimal angle size of 90 0C, rotor diameter of 400 mm, rotor height of 1000 mm for average wind speed of 13.9 m / s. and Average solar heat of 28 0C with an average panel temperature of 55.3 0C using the Timer switch as a solar tracking system. The design of the plant, produces turbine power of 0.93 V to 1.17 V at 122 rpm to 214 rpm. And the solar panel produces a panel voltage of 19.59 V and an average voltage on the battery of 14 V. The stored electrical energy is able to light two LED lights with a power of 15 Watt and last for 12 hours / day

Keywords Hybrid Power Generation, Optimal Angle, Timer Switch


Full Text:

PDF

References


Fajrin, A. N. (2012). Perancangan Prototipe Sistem Penjejak Matahari Untuk Mengoptimalkan Penyerapan Energi Surya Pada Solar Cel. Jurusan Teknik Elektro.

Ismail. (2017). Optimasi Perancangan Turbin Angin Vertikal Tipe Darrieus Untuk Penerangan Di Jalan Tol . Seminar Nasional Sains dan Teknologi 2017.

Julisman, A. (2017). Prototipe Pemanfaatan Panel Surya Sebagai Sumber Energi Pada Sistem Otomasi Atap Stadion Bola. KITEKTRO: Jurnal Online Teknik Elektro.

Nasution, R. Y. (juli 2015). Perancangan Dan Implementasi Tuner Gitar Otomatis Dengan Penggerak Motor Servo Berbasis Arduino. Jurnal Elektro Telekomunikasi Terapan.

Pratiwi. (2019). Rancang Bangun Charge Controller Panel Surya DenganMenggunakan Sistem Fast Charging. Artikel.

Prihananto, D. (2017). Uji Eksperimental Pengaruh Sudut Kemiringan Sudu, Posisi Vertikal Turbin Cross Flow Dan Sudut Pengarah Aliran (Guide Vane) Terhadap Daya Poros Yang Dihasilkan Pada Sistem Pemulihan Energi Terintegrasi Dengan Menara Pendingin. Skripsi.

Putranto, A. (2011). Rancang Bangun Turbin Angin Vertikal Untuk Penerangan Rumah Tangga. Tugas Akhir.

Saputra, M. A. (n.d.). Inovasi Peningkatan Efisiensi Panel Surya Berbasis Fresnel Solar Concentrator Dan Solar Tracker.

Sulaiman Ali, M. S. (2015). Analisis Pembangkit Listrik Hybrid Untuk Kawasan. Jurnal Mekanova.

Sumiati, R. (juni 2012). Pengujian Turbin Angin Savonius Tipe U Tiga. Jurnal Teknik Mesin.




DOI: https://doi.org/10.35308/jmkn.v6i1.2224

Refbacks

  • There are currently no refbacks.