Studi Simulasi Numerik Aliran Melintasi Backward Facing Step Dengan Penambahan Rectangular Bump
Abstract
Rectangular bump merupakan salah satu jenis pengganggu atau turbulator dengan tujuan mengganggu aliran supaya aliran menjadi turbulen lebih awal sebelum daerah recirculaion flow. Penelitian ini dilakukan untuk mendapatkan informasi mengenai fenomena aliran yang melewati backward facing step setelah dilakukan penambahan rectangular bump didepan daerah recirculation. Rectangular bump ditempakan dengan jarak yang berbeda (s/d = 0,5 dan s/d = 2) dengan harapan bisa memprediksi Reattachmen lenght, menghitung nilai Coefficient pressure (Cp) dan Skin friction coefficient (Cf). Penelitian dilakukan secara numerik menggunakan perangkat lunak Computational Fluid Dinamics (CFD) komersial. Dengan memilih berbagai model turbulensi, yaitu model Standard k- (SKE), model Realisable k- (RKE), model Standard k-???? (SKW) dan model Shear-Stress-Transport (SST) k-???? (SSTKW).
Full Text:
PDFReferences
Skovgaard, M, Nielsen, Peter Vilhelm, (1991), “Numerical
Investigation of Transitional Flow over a Backward Facing Step Using
a Low”, Aalborg: Dept. of
Building Technology and Structural Engineering. Indoor
Environmental Technology, No. 22, Vol. R9150
Restivo. A. M. 0, (1979), “Turbulent flow in ventilated rooms”, Imp.
Coll. of Science and Tech, Mech Eng. Dept. Ph.D. Thesis
Peng Shia-Hui, (1996), “The Two-Equation Turbulence k-ω Model
Applied to Recirculating Ventilation Flows”, Department of Thermo-
and Fluid Dynamics.
Driver, D. M, Seegmiler, H. L, (1985), “Backward facing step with
inclined opposite wall experiments”
J.Y.Kim, Afshin J. Ghajar, Clement Tang, (2005), “Comparison of
near wall treatment methods for high Reynolds Number backward
facing step flow”, School of
Mechanical and Aerospace Engineering, Oklahoma State University,
Stillwater, 74078
DOI: https://doi.org/10.35308/jmkn.v4i1.1578
Refbacks
- There are currently no refbacks.