ANALISA PEMAKAIAN ALAT BERAT EXCAVATOR DENGAN STRAIGHT LINE DAN REDUCING CHARGE METHOD

Bambang Tripoli, Dian Febrianti, Musliadi Musliadi

Abstract


PT. Gramita Eka Saroja, which is engaged in providing construction services in Meulaboh, West Aceh Regency, has heavy equipment that requires initial investment and a significant operating cost. Technically the existing equipment
can still be operated and be able to produce, but it is economically unprofitable. In the case of the issues raised by this study, it is closely related to the estimated cost of owning an excavator heavy equipment so that the company can overcome the problems related to the use of the tool by determining the depreciation and economic value of the tool. Based on the explanation, the problem and the objective of this research are how much the cost of owning costs must be calculated as long as the equipment is operated from new (purchase) in 2007 to 2018 with the economic life of the excavator heavy equipment is 11 years of use, if it is considered depreciating based on the straight-line method and the depreciation method decreases every year. Based on the calculation of depreciation per year by the straight-line method
of Rp. 38,636,364 per year, with working hours Rp. 100,000 per hour / year. In the method of a balanced reduction in depreciation in 2007 Rp. 100,413,223 and in 2018 amounting to Rp. 20,059,008, while the total value of the year
produced Rp. 95,764,463 with a 2007 book value of Rp. 187,471,826 and in 2018 amounting to Rp. 8,705,860 with a
book value (residual value per year) Rp. 100,413,223. Bank, insurance and tax interest rates are Rp. 18,953 per hour.

Keywords: excavator, owning cost, depreciation, economic life.


Full Text:

PDF

References


Hardinto, J.2013, Analis Kebuthan Peraltn Berat Tempat Pemrosean Akhir (TPA) Samph Kabupten

Mamuj, Tugas Akhir, Unversita Muslim Indoesia, Mkasr.

Linardyi, V.20, Studi Analis Investai AltBerat, Tesi, Jursan Teki SplFakults Tekni Uversita

Kristen Marntha, Bndug.

Pujawn, I.N20, Ekonmi Tekni, EdisPertam Cetakn Kedua, Penrbit Guna Widya, Surbay.

Saroj, G.E, 2017, Dat Invoice Spcifaton Tols, Perusahn PT. Gramit Eka Sroja, Meulaboh, Aceh

Bart.

Salim, A.204, Analis Waktu Perganti AlatBerat JnisWhel Loader Dnga Metod Least Co, Tesi

Jursan Teki SplFakults Tekni Uversita Kristen Marntha, Bndug.

Sopa, R.M, Perman, S.dan Frida, I.2013, Perbandigan Biya dnWaktu Pemakin AlatBerat Buldozer

dan Excavtor Dibandgkan Degan Bckhoe Lader pad Pembanguan Petrnak Ayam Dayeuh

Mangu, Jurnal Konstruki Sekolah Ting Teknolgi Garut.

Tarign, M.H, 209, Pentuan Umur Ekonmis Dump Truck Denga Menguakn Metod Biay Thuna

Rat-a pda PTN 3 PKS ebun Rambutan, Skrips Progam Diploma IV, Fakults Tekni, Universta

Sumater Utar, Medan.

Thaers, H.O, 201, Ekonmi Tekni (Metod Penyustan, Umur Ekonmis, dan Aalis Ekonmi), Paper,

Jursan Teki Industri Fakults Teknolgi Industri, Unversita Gunadrma, Jkrta.

Trijon, 208, Evalusi Aetla Berat pdaDivs Peraltn Kostruki dPT. Wijay Kary, Jursan Teki

Sipl Fakults Tekni, Istiu Teknolgi Sepulh Nopembr, Suaby.

Wilop, Dj.201, Metod Knstruki danAlt-a Berat, Penrbit Unversita Indoesia (UI-Pres), Jakrt.




DOI: https://doi.org/10.35308/jts-utu.v4i2.1989

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Jurnal Teknik Sipil dan Teknologi Konstruksi