Pengendalian Kualitas Cake dengan Seven Tools di Usaha Ladior, Payakumbuh

Winny Alna Marlina, Habibullah Habibullah, Armijal Armijal

Abstract


Established in 2002, the Ladior Cake and Cookies MSME operates in the culinary industry, specializing in the production of different kinds of moist cakes and pastries. The company places a strong emphasis on quality control. The company suffered from defective products resulting from quality issues in the production of both wet and dry cakes. Cake flaws include burned cakes, uneven cake sizes, unsightly cakes, easily brittle cakes, and moldy cakes. The purpose of this research is to control cake quality utilizing seven tools. This study is using a quantitative methodology. The research findings indicate that five different types of cake defects were obtained using the check sheet; the highest defects were caused by burnt cake when stratification was applied; the data were obtained using a histogram; the scatter diagram displayed the relationship between the factors causing defects; the Control Chart diagram displayed controlled cake production data; the Pareto diagram identified the defects that required attention, the most critical of which was an empty cake; and the Fish Bone Diagram identified the factors that cause burnt cake defects because the oven needed to be replaced. Factors including Man, Machine, Method, and Material are responsible for the highest number of cake defects out of all product. The Ladior Cake & Cookies owners have to improve maintenance, honing worker professionalism, and stepping up production process oversight to cut down on the amount of faulty goods. Seven tools will be added to the TQM technique by future researchers and used with other MSMEs.


Keywords


Quality Control; Seven Tools; Defect Product

Full Text:

PDF

References


N. Aziza and F. B. Setiaji, “Pengendalian Kualitas Produk Mebel Dengan Pendekatan Metode New Seven Tools,” Tek. Eng. Sains J., vol. 4, no. 1, p. 27, 2020, doi: 10.51804/tesj.v4i1.791.27-34.

L. Permono, L. A. Salmia, and R. Septiari, “Penerapan Metode Seven Tools Dan New Seven Tools Untuk Pengendalian Kualitas Produk (Studi Kasus Pabrik Gula Kebon Agung Malang),” J. Valtech, vol. 5, no. 1, pp. 58–65, 2022.

M. Rofieq and R. Septiari, “Penerapan Seven Tools Dalam Pengendalian Kualitas Botol Plastik Kemasan 60 Ml,” J. Ind. View, vol. 3, no. 1, pp. 23–34, 2021, doi: 10.26905/jiv.v3i1.5720.

M. R. Rosyidi, N. Izzah, and T. K. Najahi, “Seven Tools untuk Menurunkan Kecacatan pada Produk Kopi,” J. Optim., vol. 6, no. 2, pp. 142–155, 2020, [Online]. Available: http://jurnal.utu.ac.id/joptimalisasi/article/view/2384

A. E. Saputra and N. A. Mahbubah, “Analisis Seven Tools Pada Pengendalian Kualitas Proses Vulkanisir Ban 1000 Ring 20 di CV Citra Buana Mandiri Surabaya,” STRING (Satuan Tulisan Ris. dan Inov. Teknol., vol. 5, no. 3, p. 252, 2021, doi: 10.30998/string.v5i3.8465.

S. Somadi, B. S. Priambodo, and P. R. Okarini, “Evaluasi Kerusakan Barang dalam Proses Pengiriman dengan Menggunakan Metode Seven Tools,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 6, no. 1, pp. 1–11, 2020, doi: 10.30656/intech.v6i1.2008.

M. W. Syifa Aunillah, M. D. Kurniawan, and H. Hidayat, “ANALISIS PENGENDALIAN KUALITAS PRODUKSI BATU KUMBUNG MENGGUNAKAN METODE SEVEN TOOLS (Studi Kasus : CV. Salsabilah Group),” Sigma Tek., vol. 5, no. 1, pp. 030–038, 2022, doi: 10.33373/sigmateknika.v5i1.4202.

B. S. Wijaya, D. Andesta, and E. D. Priyana, “Minimasi Kecacatan pada Produk Kemasan Kedelai Menggunakan Six Sigma, FMEA dan Seven Tools di PT. SATP,” J. Media Tek. dan Sist. Ind., vol. 5, no. 2, p. 83, 2021, doi: 10.35194/jmtsi.v5i2.1435.

Y. Zakariya, M. F. F. Mu’tamar, and K. Hidayat, “Analisis Pengendalian Mutu Produk Air Minum dalam Kemasan Menggunakan Metode New Seven Tools (Studi Kasus di PT. DEA),” Rekayasa, vol. 13, no. 2, pp. 97–102, 2020, doi: 10.21107/rekayasa.v13i2.5453.

J. Laili and M. D. Kurniawan, “Optimalisasi Standar Kualitas Sarung Tenun Dengan Aplikasi Seven Tools Pengerajin Sarung Indonesia,” vol. 17, no. 1, pp. 35–45, 2023.

W. A. Marlina and C. P. Sabrina, “Pengendalian kualitas roti dengan statistic process control di umkm roti albatsit payakumbuh,” vol. 23, no. c, pp. 99–112, 2023.

V. Devani and M. Oktaviany, “Usulan Peningkatan Kualitas Pulp Dengan Menggunakan Metode Seven Tools Dan New Seven Tools Di Pt. Ik,” Agrointek, vol. 15, no. 2, pp. 521–536, 2021, doi: 10.21107/agrointek.v15i2.7166.

W. A. dan H. Marlina, “Business Feasibility Study at SMEs Fried Corn Sukma, Payakumbuh,” vol. 12, no. 2, pp. 202–220, 2021.

W. A. Marlina and S. Susiana, “The Effects of Case-Based Method, Project-Based Learning, and Experiential Method on Students’ Analytical Ability in the Global Marketing Management Course,” Proc. 4th Int. Conf. Educ. Dev. Qual. Assur. (ICED-QA 2021), vol. 650, pp. 280–284, 2022, doi: 10.2991/assehr.k.220303.051.

L. Nurhayati and A. D. Dewantoro, “Pengendalian Kualitas pada Proses Pembahanan Kayu Finger Joint Laminating dengan Integrasi Seven Tools dan Quality Function Deployment.,” Matrik J. Manaj. dan Tek. Ind. Produksi, vol. 23, no. 2, p. 179, 2023, doi: 10.30587/matrik.v23i2.4841.

W. A. Marlina, Manajemen operasional dan penerapan pada umkm. Depok: PT RajaGrafindo Persada, 2022. [Online]. Available: https://www.rajagrafindo.co.id/produk/manajemen-operasional-dan-penerapan-pada-umkm-winny-alna-marlina-s-t-m-m/

E. dan I. N. Haryanto, “Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin Cnc Lathe Dengan Metode Seven Tools,” J. Tek., vol. 8, no. 1, 2019, doi: 10.31000/jt.v8i1.1595.

N. Hairiyah, R. R. Amalia, and N. Nuryati, “Pengendalian Kualitas Amplang Menggunakan Seven Tools Di Ud. Kelompok Melati,” Agrointek, vol. 14, no. 2, pp. 249–257, 2020, doi: 10.21107/agrointek.v14i2.6055.

V. Kartika Sari and Y. Widharto, “METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) (Studi Kasus: PT. Masscom Graphy),” 2017.

T. P. Matondang and M. M. Ulkhaq, “Aplikasi Seven Tools untuk Mengurangi Cacat Produk White Body pada Mesin Roller,” J. Sist. dan Manaj. Ind., vol. 2, no. 2, p. 59, 2018, doi: 10.30656/jsmi.v2i2.681.

I. Nursyamsi and A. Momon, “Analisa Pengendalian Kualitas Menggunakan Metode Seven Tools untuk Meminimalkan Return Konsumen di PT. XYZ,” J. Serambi Eng., vol. 7, no. 1, pp. 2701–2708, 2022, doi: 10.32672/jse.v7i1.3878.

A. A. Abidin, W. Wahyudin, R. Fitriani, and F. Astuti, “Pengendalian Kualitas Produk Roti dengan Metode Seven Tools di UMKM Anni Bakery and Cake,” Performa Media Ilm. Tek. Ind., vol. 21, no. 1, p. 52, 2022, doi: 10.20961/performa.21.1.53700.

Y. Erdhianto, “Quality Control Analysis To Reduce the Number of Defects in the Packaging of Pg Kremboong Sugar Products Using Seven Tools Method,” Tibuana, vol. 4, no. 01, pp. 28–35, 2021, doi: 10.36456/tibuana.4.01.3174.28-35.

M. J. Firmansyah et al., “Analisis Pengendalian Kualitas Produksi Pada PT.XYZ Menggunakan Metode Seven Tools Dan FMEA,” SITEKIN J. Sains, Teknol. dan Ind., vol. 20, no. 1, pp. 231–238, 2022.

M. R. Rosyidi and N. Narto, “Pengendalian Kualitas Produk Batu Nisan di Kota Gresik dengan Pendekatan Seven Tools,” J. Optim., vol. 9, no. 1, p. 45, 2023, doi: 10.35308/jopt.v9i1.6766.




DOI: https://doi.org/10.35308/jopt.v9i2.8367

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal Optimalisasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JOPT: Jurnal Optimalisasi Indexing and Abstracting by: