ANALISIS USULAN PERBAIKAN MUTU PRODUK BERDASARKANMETODE SEVEN TOOLS DI PT. X
Abstract
Have done analyzing the proposed improvement of product quality by method Seven Tools. From the calculation and analysis tools with seven methods that have been done there are three defects that occur on the production floor with the number of product defects due to a loose assembly of 196 pieces with a percentage of 59.57%, and disability as a result of gluing the loose many as 82 pieces of disability (24, 92%), the smallest of disability by 51 disability (15.50%) which is due to lack of good raw material. The cause product defects occur due to human factors, machine, material, method, and the work environment, so that it can be said that the process is out of control. By using Seven tools in controlling the quality of products, can know and minimize the occurrence of product defects so that the quality and product quality under control.
Keywords : Seven tools, product quality, disability.
Full Text:
PDFReferences
Fakri, A. 2010. Usulan Perbaikan Mutu Produk Rubber Smoke Sheet (RSS) Berdasarkan Metode Kaizen Di PT. Perkebunan Nusantara III Kebun Gunung Para. Medan, USU.
Assauri, Soyjan. 2008. Manajemen Produksi dan Operasi, Jakarta: LPFEUI. diakses dari www.aslilaspot.co.idh.blog /2013/02/pengertian-mutu-produk.html.
Garvin, D. 1994. Kualitas Produk : Alat Strategi Yang Penting. Free Press.
Juran. 1962. Quality control handbook. New York, McGraw-Hill.
Even, R.. 2015. Pengendalian Kualitas Untuk Mereduksi Kecacatan Produk Dan Meningkatkan Kecepatan Produksi Dengan Pendekatan Metode Lean Six Sigma Pada PT. Bamindo Agrapersada. Medan, USU.
Garvin, D. A. 1987. Managing Quality. New York, The Free Press.
Poerwanto, G., Hendra. 2014. Membahas konsep dan cara membuat Peta Kendali (Control Chart) X bar dan R Chart. (www.aslilaspot.co.idh.blog).
Nasution. 2005. Total Quality Management. (www.aslilaspot.co.idh.blog /2013/02/pengertian -mutu-produk.html).
Simorangkir. 2015. Analisis Sistem Pengendalian Mutu Produk Pintu Berbahan Baku Kayu Dengan Menggunakan Pendekatan Lean Six Sigma Pada PT. Sumatera Timberindo Industry. Medan, USU.
DOI: https://doi.org/10.35308/jopt.v2i2.175
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 Jurnal Optimalisasi
JOPT: Jurnal Optimalisasi Indexing and Abstracting by:
P-ISSN: 2477-5738 I E-ISSN: 2502-0528 I DOI: 10.35308
Jurusan Teknik Industri, Fakultas Teknik, Jl. Alue Peunyareng, Kampus UTU, Meureubo, Kabupaten Aceh Barat, Aceh 23615, Indonesia, Email:jopt@utu.ac.id
is licensed under a Attribution 4.0 International License