Desain Roda Bersirip Standar dan Bersirip Buka Tutup untuk Pengujian di Lahan Sawah

Herdi Susanto, Farid Jayadi, Syahrul Fathi, Mahmuddin Marbun, Al Munawir, Syaiful Hasdi

Abstract


The finned drive wheel technology is widely used for wet rice fields. Currently, finned drive wheels for peat fields have not been developed and still use traditional agricultural tools such as hoes and sickles, while the finned drive wheels for wet rice fields are not yet able to work optimally on peat rice fields. The driving wheel model and testing in peat rice fields were carried out in this research. Design and manufacturing were carried out by referring to previous research literature. This initial research was carried out in wet rice fields on open-close finned drive wheels and standard finned wheels, with the aim of measuring the comparative level of performance of the two wheel models. The wheel performance measured is sinkage and wheel rotational speed. The research produced two models of driving wheels, namely the standard fin type with a driving wheel diameter of 35 cm and a number of 8 fins and the open-close fin type producing a driving wheel diameter of 40 cm with 4 arcuate fins on the top surface of the driving wheel. Standard fin type drive wheels have smaller sinkage (11% on average) compared to open-close fin type wheels. The finned drive wheel with the open-close type has an average speed level that is 27.7% higher when compared to the standard finned type.

Keywords – wheel drive, standard fins, open-close fins, sinkage, wheel speed


Full Text:

PDF

References


E. Wildayana, M. E. Armanto, M. S. Imanudin, and H. Junedi, “Characterizing and Analyzing Sonor System in South Sumatra Tidal Wetlands,” J. Wetl. Environ. Manag., vol. 5, no. 2, pp. 6–13, 2017.

A. Fahmuddin, A. Markus, and J. Ali, Lahan gambut Indonesia: Pembentukan, karakteristik, dan potensi mendukung ketahanan pangan. IAARD Press, 2016.

R. R. Rachmawati and H. Tarigan, “Inovasi Pertanian dan Pemberdayaan Masyarakat Petani di Lahan Gambut,” 2020.

H. Susanto, “Rancang Bangun Mesin Panen Padi Mini Dua Lajur dengan Motor Penggerak Tenaga Surya,” Pros. Semnastek, 2018.

H. Susanto and Z. Husin, “Laporan Akhir Penelitian Dosen Muda: Kajian Kebutuhan Daya Motor Penggerak Mesin Panen Padi Dua Lajur Bertenaga Matahari,” Meulaboh, 2019.

H. Susanto, H. Darsan, Mukhlizar, and N. FITRIADI, “Performa Panel Surya 2 X 50 WP pada Mesin Panen Padi Mini Dua Lajur,” J. Rekayasa Mesin, vol. 12, no. 2, pp. 305–313, 2021.

Herdi Susanto, “Desain dan Manufaktur Teknologi Tepat Guna Pedesaan.” Bandar Publishing, Banda Aceh, p. 227, 2018.

Swastika and D. K. Sandra, “Teknologi panen dan pascapanen padi: kendala adopsi dan kebijakan strategi pengembangan,” 2012.

H. Susanto, Z. Husin, A. Sutrian, and N. Fitriadi, “Analisa Luaran Tegangan dan Arus Listrik pada Rangkaian Panel Surya Mesin Panen Padi Mini,” J. Mekanova Mek. Inov. dan Teknol., vol. 6, no. 1, pp. 77–84, 2020.

M. Idkham, T. Mandang, W. Hermawan, and G. Pramuhadi, “Design analysis of narrow lug wheel for wet paddy field,” Int. J. Sci. Technol. Res., vol. 8, pp. 286–291, 2019.

T. Rizaldi, W. Hermawan, T. Mandang, and S. Pertiwi, “Determining Parameters of Lug Wheels Design by Measurement of Soil Penetration Resistance in Paddy Field,” 2015.

H. Susanto and J. Supardi, “Uji Kinerja Roda Penggerak Bersirip Mesin Panen Padi Dua Lajur.” Lembaga Penelitian, Pengabdian Kepada Masyarakat dan Penjaminan Mutu Pendidikan, Meulaboh, p. 65, 2022.

H. Susanto, J. Supardi, H. Darsan, and N. Fitriadi, “Testing Cage Wheels Driven on Peaty Paddy Fields,” Nongye Jixie Xuebao/Transactions Chinese Soc. Agric. Mach., vol. 54, no. 7, 2023.

H. Susanto, A. Bakar, and Syuhada, “Rancang Bangun Mesin Pemotong Padi Multifungsi,” J. Mekanova Mek. Inov. dan Teknol., vol. 3, no. 1, 2017.

D. Gee-Clough and W. Chancellor, “Pull and lift characteristics of single lugs on rigid wheels in wet rice soils,” Trans. ASAE, vol. 19, no. 3, pp. 433–441, 1976.

H. Susanto, Z. Husin, and S. Ali, “Desain dan Fabrikasi Roda Penggerak untuk Mesin Panen Padi Mini Dua Lajur,” J. Mekanova Mek. Inov. dan Teknol., vol. 7, no. 2, pp. 136–144, 2021.

V. M. Salokhe, S. Manzoor, and D. Gee-Clough, “Pull and lift forces acting on single cage wheel lugs,” J. Terramechanics, vol. 27, no. 1, pp. 25–39, 1990.

L. Jayasundera, “Study of factors affecting the design of flat lugged cage wheels in paddy soils.,” 1980.

W. Hermawan and R. P. A. Setiawan, “Kinerja Traksi Roda Ramping Bersirip pada Berbagai Kombinasi Jumlah dan Sudut Sirip di Tanah Sawah Berlumpur,” J. Keteknikan Pertan., vol. 5, no. 1, 2017.

H. Susanto, Z. Husin, and J. Supardi, “Modification of Two-lane Mini Rice Harvesting Machine,” in Seminar Nasional Tahunan Teknik Mesin (SNTTM), Jakarta: Badan Kerja Sama Teknik Mesin (BKS-TM) Indonesia, 2019, pp. 1–6. [Online]. Available: http://prosiding.bkstm.org/prosiding/seminar/2019




DOI: https://doi.org/10.35308/jmkn.v10i1.9336

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.