BESARNYA PERTAMBAHAN PANJANG RANTAI BUCKET CONVEYOR TIPE IBS AKIBAT BEBAN ANGKAT 4 TON DAN BEBAN MAKSIMUM

Herry Darmadi, Jajuliansyah Jajuliansyah, Novia Nelza, Irwan Rachmiadji, Justaman Arifin Karo Karo

Abstract


Chain is a series of links or rings that are connected or attached to one another so that they form an elongated shape. Chains are used to move loads or continue rotation. One of the chains that is often used is steel. One of them is a roller chain installed in a bucket conveyor, where this conveyor functions to convey crumb rubber from one process to the next. In this research the author carried out two tests on the chain to obtain an increase in the length of the chain. In the first test the chain plate was carried out in a tensile test with a load of 4 tons and the second test was carried out with a maximum load until the chain broke. After the author carried out the first test, the amount of increase in chain length (ɛ) after being averaged was 0.54%. In the second test, the maximum load (Fmax) after being averaged was 7.298 tons, and the increase in chain length (ɛ) was 7.2%.

Full Text:

PDF

References


Priyantoro, D., Sujitno, T., Pribadi, B., & Arif, A, N, Z (2016). PERLAKUAN PERMUKAAN PADA ROLLER RANTAI DENGAN METODE PLASMA CARBURIZING DARI CAMPURAN GAS He DAN CH4 PADA TEKANAN 1,8 mbar, Jurnal Forum Nuklir (JFN) 10(2): 71-74.

Hawini, H., Lendra, Waluyo, R., (2018). ANALISIS RANTAI PASOK BAJA RINGAN DI KOTA PALANGKA RAYA, Jurnal Teknika, 2(1): 13-23.

Didik, E., Mardjuki., Jumiadi., (2015). ANALISA PENGARUH DEFORMASI PLASTIS TERHADAP STRUKTUR MIKRO DAN KEKERASAN PADA BAJA ST 42, TRANSMISI, 11(1): 19-26

Budiman, Haris,. (2016), ANALISIS PENGUJIAN TARIK (TENSILE TEST) PADA BAJA ST37 DENGAN ALAT BANTU UKUR LOAD CELL, Jurnal J-Ensitec, 3(1): 9-13

Ruzzuqi, R., Maryanto, ET., Rahmat, A,. (2022). KUAT TARIK BAJA TULANGAN POLOS (STUDI KASUS: PT. GHODY BIMANTARA MANDIRI), Jurnal METIKS, 2(1): 9–14

Jagad, MSN., Utami, NPE., Pratiwi, DK., (2021), ANALISIS KERUSAKAN PADA CHAIN LINK APRON FEEDER, JURNAL REKAYASA MESIN, 21(2): 61-66

Amir, Murtalim, Apriyanto c, M., Rahman, A, M., Alfarez, A., (2020). ANALISIS KERUSAKAN PADA RANTAI CONVEYOR, Jurnal Buana Ilmu, 5(1): 224-235.

Romadhan, R, A,. Nugroho, W, A,. Suwanda, Totok,. Wilza, Romi,. (2019). Sifat Tarik dan Struktur Mikro Sambungan Las Gesek Tak Sejenis Baja-Tembaga, 3(1): 20-27.

Syam, B,. Muttaqin, M,. Eddo,. Rozy, F,. Sandry, F,. Darmadi, H,. (2021). Analisa Eksperimental Material Komposit Diperkuat Serat Kaca Sebagai Bahan Alternatif Pembuatan Ladam Kuda, Talenta Conference Series: Energy and Engineering (EE), 4 (1): 634-641




DOI: https://doi.org/10.35308/jmkn.v9i2.8622

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.