Kuat Tekan Material Dari Bahan Komposit Diperkuat Serat Tandan Kosong Kelapa Sawit (TKKS)

Syukarni Ali, Rusman AR

Abstract


Oil palm empty fruit bunches waste (TKKS) is produced annually around ± 23.3 tons of waste per hectare. Therefore, the need for further utilization of the TKKS utilization for technological products is still very low used. And Economical products that have been done such as particle board manufacturing with phenol formaldehyde adhesive and paper raw materials, Indonesia as an agrarian country with accumulated development outside the average land area of 11.12 per year . Palm production 1.9 million tons of dry weight or 4 million tons of wet weight per year. This study aims to obtain the compressive strength of the material from fiber-reinforced composite TKKS material. From the results of this study will reduce the production of waste TKKS and can be utilized as material that has the value of economical products and high selling power. Method of execution of this research by treating TKKS waste and compressive static test of composite material by using test result of servopulser which has been obtained by average value of Voltage (σ) 65,45 (N / mm2), Strain (ε) 0,073 mm, Modulus of Elasticity (E ) 926.34 (MPa).

Keywords : oil palm empty fruit bunch waste, economical products, compressive strenght of the material


Full Text:

PDF

References


Umar, S. Potensi Limbah Kelapa Sawit Dan Pengembangan Peternakan Sapi Berkelanjutan Di Kawasan Perkebunan Kelapa Sawit. Jurnal Wawasan, Vol 13., No.3, Tahun 2008,

Subiyanto, Bambang, dkk. Utilization of Empty Fruit Bunch Waste from Oil Palm Industry for Particleboard Using Phenol Formaldehyde Adhesive. Warta PPKS 1-4.

Isroi, Pengolahan TKKS (Tandan Kosong Kelapa Sawit), (online) (http://www.isroiwordpress.com, diakses tanggal 14 April 2011).

Ali, S. Pengaruh Pengaruh Beban Impak Jatuh Bebas Pada Produk Inovasi Parking Bumper Dari Bahan Polymeric Foam Diperkuat Serat Tandan Kosong Kelapa Sawit (TKKS), jurnal mekanova vol. 1 edisi 1.

Nuryanto, E. Pemanfaatan Tandan Kosong Kelapa Sawit Sebagai Sumber Bahan Kimia. Warta PPKS : 137-144. 2004.

Roozenburg, N. F. M. Eekels, J., Product Desain : Fundamentals and Methods; John Willey & Sons (1991).

Hashim, J., Pemrosesan Bahan, Edisi pertama, Johor Bahru: Cetak Ratu Sdn. Bhd., 2003.

Gunawan, F.E., dkk, Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber, Journal of Solid Mechanics & Materials Engineering, Vol. 3., No. 7, 2009.

Sivertsen, K., Polymeric Foam., (online) (http://ocw.mit.edu/courses/materials-science-and-engineering/3-063-polymerphysics-spring-007/assignments/polymer_foams.pdf., diakses 15 Januari 2011.)

Zulfikar, Pembuatan Dan Penyelidikan Perilaku Mekanik Material Polymeric Foam Diperkuat Serat Tandan Kosong Kelapa Sawit (TKKS) Akibat Beban Statik Dan Impak. Tesis Master (tidak dipublikasikan), 2010.

EnviroCarbon Sdn. Bhd., Typical Parameters of EFB Fiber, (diakses, tgl 23 Juli, 2011),

Fergyanto E.G, Homma H, Satryo S B, dkk; Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber., Jurnal of Solid Mechanics and Materials Engineering, hal 943-951, vol.3 No.7, 2009.




DOI: https://doi.org/10.35308/jmkn.v3i1.861

Refbacks

  • There are currently no refbacks.