PENGARUH TEMPERATUR UAP TERHADAP EKSPANSI VOLUME DAN TEGANGAN TERMAL RODA LORI DISTASIUN PEREBUSAN PT. X

Herry Darmadi, Jery Manaor Simarmata, Sorta Lumbantoruan, Nurlianna Tarigan, Dian Kurnia, Novia Nelza

Abstract


Lorry wheels at the boiling station of a Palm Oil Mill (PKS) are exposed to high-temperature saturated steam during the boiling process, which causes volume expansion and thermal stress in the wheel material. This study aims to analyze the effect of steam temperature on volume expansion and thermal stress on lorry wheels in the palm oil mill sterilization station. Data were obtained through direct observation and theoretical calculations using ASTM A36 steel material parameters. The results show that an increase in steam temperature from 110.27°C to 133.59°C causes volume expansion of up to 1.39 × 10⁻⁵ m³ and thermal stress of up to 241.41 MPa, approaching the material's yield strength (250 MPa). It is concluded that steam temperature significantly affects deformation and potential failure of lorry wheel material.


Full Text:

PDF

References


R. Lumintang and F. Abdul Rauf, “PENGENALAN PENGGUNAAN ALAT UJI MATERIAL IMPACT TEST BAGI SISWA SMK DI TONDANO KABUPATEN MINAHASA,” 2020.

C. Ruskandi, A. Siswanto, and R. Widodo, “Karakterisasi fisik dan kimiawi bentonite untuk membedakan natural sodium bentonite dengan sodium bentonite hasil aktivasi,” 2020.

A. Ilcham, O. Rama Gardatoga, and dan Ade Irma, “Karakter Lumpur Pemboran Berbahan Dasar Bentonite Lokal Tulungagung dan Boyolali Mengacu Standar API 13A dengan Variasi Additive Polyamine,” in Prosiding Seminar Nasional Teknik Kimia “Kejuangan,” May 2023, pp. 1–5.

R. Derianto, M. Taufiqurrahman, and M. Ivanto, “Rancang Bangun Alat Uji Impact 100 Joule Type Charpy Skala Laboratorium (1)* Rizky Derianto, (2) Muhammad Taufiqurrahman, (3) Muhammad Ivanto,” Jurnal Teknologi Rekayasa Teknik Mesin (JTRAIN) Derianto, Taufiqurrahman & Ivanto, vol. 5, no. 2, pp. 19–24, 2024.

G. Allegra Satoding dkk, G. Allegra Satoding, M. J. Azis Albar, and J. Sumbung, “A Study on The Effectiveness of Bentonite Adsorbent in Reducing Pb Metal Levels in Used Lubricating Oil Studi Efektivitas Adsorben Bentonit Terhadap Penurunan Kadar Logam Pb pada Minyak Pelumas Bekas,” Jurnal Sains dan Teknik Terapan, vol. 2024, no. 1, pp. 20–26, 2024, [Online]. Available: https://journal.akom-bantaeng.ac.id/index.php/jstt

Musdalifah, M. Syahrir, Suriati, and E. Putri, “Sintesis Komposit Bentonit-Fe2O3 serta Aplikasinya dalam Fotodegradasi Larutan Fenol Sintesis Komposit Bentonit-Fe2O3 serta Aplikasinya dalam Fotodegradasi Larutan Fenol Sinthesis of Bentonite-Fe2O3 Composite and the Application in Photodegradation of Phenol Solution,” Jurnal Chemica, vol. 23, no. 2, pp. 9–17, Dec. 2022.

R. Ella Estiarny, T. Emilia Agustina, T. Indah Sari, and R. Gayatri, “The Effect of Bentonite Activation and Its Application on Reducing Metal Ions Levels in Wastewater,” Jurnal Teknologi Volume, vol. 17, no. 2, pp. 115–122, 2025, doi: 10.24853/jurtek.17.2.115-122.

A. Atikah, “EFEKTIFITAS BENTONIT SEBAGAI ADSORBEN PADA PROSES PENINGKATAN KADAR BIOETANOL,” Distilasi, vol. 2, no. 2, pp. 23–32, Sep. 2017.

G. Geraldina, T. Taslimah, and Nuryanto, “Pemanfaatan Montmorillonit Terpilar Al-Cr pada Adsorpsi Zat Warna Rhodamin B dengan Variasi Massa Adsorben dan Waktu Adsorpsi,” Jurnal Kimia Sains dan Aplikasi, vol. 19, pp. 99–106, 2016.

S. Kurniadi, “Pembuatan Alat Uji Impak Charpy Untuk Material Plastik Dengan Takik,” 2019.




DOI: https://doi.org/10.35308/jmkn.v12i1.15083

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi
p-ISSN: 2477-5029  I  e-ISSN: 2502-0498  I  DOI: 10.35308
Jl. Alue Peunyareng, Ujong Tanoh Darat, Meureubo, Kabupaten Aceh Barat, Aceh 23681, Indonesia
License Creative Commons is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License