Optimasi Line Balancing PCB Televisi LCD dengan Lean Manufacturing dan RPW
Abstract
The electronics manufacturing industry, particularly in Printed Circuit Board (PCB) assembly for LCD televisions, requires highly efficient production systems to meet output targets and improve labor productivity. One of the critical issues frequently encountered is assembly line imbalance, characterized by bottlenecks, idle time, and uneven workload distribution across workstations. This study aims to optimize line balancing in the PCB production line of LCD TV Model P14xx by integrating the Ranked Positional Weight (RPW) method with a Lean Manufacturing approach. The research begins with an initial condition analysis to evaluate line efficiency, balance delay, and bottleneck locations. Subsequently, Lean Manufacturing tools are applied to identify and eliminate non-value-added activities (waste) within the production process. The RPW method is then implemented to optimize task allocation based on positional weights while considering precedence constraints. The results demonstrate that the integrated approach significantly improves production system performance. Line efficiency increases from 69% to 82%, while balance delay decreases from 31% to 18%. Additionally, the number of workstations is reduced from 15 to 10, and labor productivity improves from 10.5 to 15.4 units per operator.
Full Text:
PDFReferences
N. André, B. Montreuil, and V. Limère, “Modeling and solving integrated assembly line balancing , assembly line feeding , and facility sizing problems,” Int. J. Prod. Econ., vol. 277, no. August, p. 109354, 2024, doi: 10.1016/j.ijpe.2024.109354.
J. El Alami, “Optimisation Of Simple Assembly Line Balancing Problem Type E: A Systematic Literature Review,” Manag. Syst. Prod. Eng., vol. 0, 2024, doi: 10.2478/mspe-2024-0016.
M. A. Ara, N. Anjum, D. Ahbab, M. Takia, S. Risat, and R. Chowdhury, “Productivity Improvement of Garments Industry by Implementing Line Balancing Algorithms — A Case Study,” Eng. Reports, pp. 1–16, 2025, doi: 10.1002/eng2.70125.
R. N. Kumar, R. Mohan, and N. Gobinath, “Materials Today : Proceedings Improvement in production line efficiency of hemming unit using line balancing techniques,” Mater. Today Proc., no. xxxx, pp. 3–7, 2021, doi: 10.1016/j.matpr.2021.03.020.
T. K. Ramasu and M. G. Kanakana-Katumba, “Implementation of a Lean Manufacturing Approach to Improving Productivity in SMEs: A Case Study in a Cloth Manufacturing Company,” South African J. Ind. Eng., vol. 36, no. December, pp. 73–87, 2025, doi: http://dx.doi.org//10.7166/36-4-3238 This.
M. F. Sugianto and Rusindiyanto, “Line Balancing Analysis with Ranked Positional Weight ( RPW ) and Region Approach ( RA ) Methods on the Production Line at,” Electron. J. Educ. Soc. Econ. Technol., vol. 6, no. 1, pp. 558–565, 2025.
A. Nur, L. Afifah, and E. R. Lestari, “Line Balancing Analysis in Ribbed Smoked Sheet Production Using Heuristics Methods ( Study at PT . Wabin Jayatama , Serang , Banten , Indonesia ),” BIO Web Conf., vol. 03004, 2024, doi: https://doi.org/10.1051/bioconf/20249003004.
F. Achmadi and B. Harsanto, “Improvement of Assembly Manufacturing Process through Value Stream Mapping and Ranked Positional Weight : An Empirical Evidence from the Defense Industry,” Processes, 2023.
S. El Machouti, “Analysis of Balancing Solutions for Simple Assembly Lines,” J. Ind. Eng. Manag., vol. 17, no. 3, pp. 828–852, 2024.
J. Huo and C. K. M. Lee, “Intelligent workload balance control of the assembly process considering condition-based maintenance,” Adv. Eng. Informatics, vol. 49, p. 101341, 2021, doi: https://doi.org/10.1016/j.aei.2021.101341.
O. Battaïa and A. Dolgui, “Hybridizations in line balancing problems: A comprehensive review on new trends and formulations,” Int. J. Prod. Econ., vol. 250, p. 108673, 2022, doi: https://doi.org/10.1016/j.ijpe.2022.108673.
DOI: https://doi.org/10.35308/jmkn.v12i1.15073
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
p-ISSN: 2477-5029 I e-ISSN: 2502-0498 I DOI: 10.35308
Jl. Alue Peunyareng, Ujong Tanoh Darat, Meureubo, Kabupaten Aceh Barat, Aceh 23681, Indonesia
is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License