ANALISA KERUSAKAN PADA REBUSAN (Sterilizer) KELAPA SAWIT DI PT.BEURATA SUBUR PERSADA

Zakaria Zakaria, Herdi Susanto

Abstract


Knowing the cause of the damage and how to repair the stew (sterilizer) carried out by the Maintenance team of PT. Beurata Subur Persada and knowing the components of the stew (sterilizer) in PT. Beurata Subur Persada as the purpose of this study. The sterilizer is a pressurized steam vessel which is usually used to boil palm oil so that it facilitates the next process steps that occur at PT. Beurata Fertile Persada. The types of damage to the sterilizer include the Steam Spiral pipe and leaks in the steam pipe. The cause of damage to the stew (sterilizer) that occurred at PT. Beurata Subur Persada, among others, there are 4 points based on the fishbone diagram [10] as follows: Material (normal or not the state of the material). Machinery (not operating or design defects in the main tools). Environment (environmental conditions around the work area). Human error (operator error, environment such as ocean currents and cleanliness of work tools). In maintenance, it can carry out daily inspections, monthly inspections and years inspections.

 

Keywords: Stew (sterilizer), failure analysis, PT. Beurata Subur Persada.


Full Text:

PDF

References


PT. Beurata Subur Persada, 2021. Industry | Update, Profil PT. Beurata Subur Persada, Nagan Raya, July 2021, ACEH

Sitepu, Tekad. (2011). “Analisa Kebutuhan Uap Pada Sterilizer Pabrik Kelapa sawit Dengan Lama Perebusan 90 Menit.”. Skripsi Jurusan Teknik Mesin Universitas Sumatra Utara.

Alfian, H. 2011. Analisa Pengaruh Ukuran Butir dan Tingkat Kelembaban Pasir Terhadap Performansi Rebusan (sterilizer) pada Pabrik Pembuatan Tiang Beton. Jurnal Dinamis Fakultas Teknik Usu,Volume.II No.8. Medan

Naibaho, waldemar and Siagian, Parulian. (2012). “Upaya Peningkatan Mutu Cpo Melalui Analisis Kebutuhan Uap Diarea Stasion Klarifikasi Pks 20 Ton Tbs/Jam”. Fakultas Teknik prodi Teknik Mesin UHN dengan konsentrasi Konversi Energi.

Syarifuddin, M. A., & Suriyanto, S. (2019). Analisis Penyebab Utama Kerusakan Belt conveyor Pada BC 6 System Menggunakan Metode Fishbone Diagram. In SEMNASTERA (Jurnal Teknologi dan Riset Terapan) (Vol. 1, pp. 223-228).

Aosoby, R., Rusianto, T., & Waluyo, J. (2016). Perancangan Rebusan (sterilizer) sebagai Pengangkut Batubara dengan Kapasitas 2700 Ton/Jam. Jurnal Teknik Mesin, 3(1), 45-51.

Barus, R. H., Komar, S., & Suwardi, F. R. (2017). Analisis Kinerja Rebusan (sterilizer) Untuk Optimalisasi Pengangkutan Bijih Nikel Di PT. Aneka Tambang Tbk Ubpn Pomalaa. Jurnal Pertambangan, 1(4).

Susanto, H. (2018). Analisa Pengaruh Casting Speed dan Superheat Terhadap Cacat Permukaan Slab Baja Grade 1A0804. Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi, 2(1).


Refbacks

  • There are currently no refbacks.